Download – Bitcoin Rebooted

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

Interested in contributing to the BTC network? Here is the steps to get a full node up and running in Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to Bitcoin [link] [comments]

Interested in contributing to the BTC community? Here is a exhaustive manual to get you up and running. (Only takes about 20-30 minutes if you are fluent in command prompt on linux).

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to rBitcoin [link] [comments]

Running a full node using Bitcoin-daemon. Instructions for Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to BTC_Reviews [link] [comments]

Scala and Bitcoin (2) - Basics of Akka and Spray JSON BITCOIN HALVING PRICED IN!!?! EMH Explained by Programmer Bitcoin Q&A: Initial Blockchain Download File System Mounting  operating systems  file system ... Noob's Guide To Bitcoin Mining - Super Easy & Simple - YouTube

Hopefully https://www.bitcoin-rebooted.xyz will be coming back online soon. Reply on Twitter 1185692798986739712 Retweet on Twitter 1185692798986739712 Like on Twitter 1185692798986739712 Bitcoin-Rebooted @BRebooted · After you’re fully synced close Bitcoin Core and open the data directory which is located by default in ~/.bitcoin — in here you’ll see the wallet.dat file. If this is a fresh install with ... The default data directory on Mac is "/Library/Application Support/Bitcoin". ... Start Your Node At Boot" would work on Mac. It seems that the "crontab" command exists on Mac, but I've never used it. I suggest changing the title of this issue to something like "Document instructions for running Bitcoin Core as a daemon on Mac OS X" and we can treat it as a TODO task. IMO the Mac instructions ... ### Bitcoin Core daemon bitcoind -par = 1 -daemon ### Bitcoin Core GUI bitcoin-qt -par = 1 Once you’ve decided you like an option, you can add it to the Bitcoin Core configuration file. You can find that file in the following directories: If your wallet files are not there in default data location then during installation you have opted to use a custom blockchain directory. Find the directory and just put the bootstrap.dat file there. Once done open your wallet.qt file and at the bottom left corner instead of “Connecting to Peers” you will see “Importing blocks from disk”.

[index] [16720] [51108] [1773] [48468] [7926] [17065] [473] [28443] [42176] [2067]

Scala and Bitcoin (2) - Basics of Akka and Spray JSON

Ivan on Tech is all about cryptocurrencies and the technology behind Bitcoin, Ethereum, Litecoin, Ripple, IOTA. We also cover Bitcoin price, altcoin price, investing, analytics, different altcoins. Get our free Bitcoin course here - https://chrisdunn.com/free-bitcoin-course This Bitcoin basics video series will explain Bitcoin for beginners. You'll lear... Hi future club members! My name is Ken, and I post YT videos with my girlfriend Carley and our dog Oreo! We love making our family in the club laugh whether ... The new much faster way to move individual games to an SSD without re downloading them! The math behind cryptocurrencies. Home page: https://www.3blue1brown.com/ Brought to you by you: http://3b1b.co/btc-thanks And by Protocol Labs: https://prot...

#